- Home
- TruckScan Automatic Vehicle Dimension Measurement System


Superior performance in all conditions, high weighing accuracy.
- High Measurement Accuracy
- Low Investment Cost
- Quick Installation and Operation
- Automatic Calibration
- Viewing 3D Vehicle Profile
- High Performance in Different Weather Conditions
TRUCKSCAN automatic vehicle dimension measurement system is designed to measure length, width and height of the vehicles with using advanced technology. This system is mainly used at Vehicle Inspection Stations, Legal Authority and Institution, International Transport and Logistics Companies, Vehicles and Vehicle Equipment Manufacturers, Logistics Service Areas for the purpose of measuring vehicles’ dimensions.
In principle, the system works with laser sensor technology, it measures the width, height, and length of vehicles through scanning them automatically. The results which is obtained in a very short time and the vehicle’s scanned three-dimensional profile can be transferred to the computer. Also, optionally the external display shows the measurement results, number plates and vehicle class can be determined. It is also possible that all data can be recorded to the DMS Dimension Measuring Software databes. As an option all data can also be transferred to the central network unit and it is provided to make integration of existing automation systems.

DMS-S Static Dimension Measurement System
DMS-S static dimension measurement system is specially designed for facilities like Vehicle Inspection Stations which has limited space and vehicle must be stable during process The dimension measurement process occurs with scanning the vehicles through the special rail system which is placed on the working space.

DMS-D Dynamic Dimension Measurement System
DMS-D dynamic dimension measurement system is specially designed for facilities like vehicle weighing and dimension control stations, international transport and logistics companies, logistics service areas, port management where the serial and intensive traffics are valid. The measurement process occurs while the vehicles are passing from the dimension measurement system which is placed on the field determined before.
Explanation | DMS-D | DMS-S |
---|---|---|
Measuring Technique | Laser Scanner – Class 1 | |
Scanning Speed | 50 Hz | |
Maximum Vehicle Speed | 140 km/h (only height) 20 km/h (all dimensions) | – |
Scanning Angle | 270° with 0.25° / 0.5° gaps | |
Accuracy | ± %2 | |
Communication | Ethernet, TCP-IP | |
Filters | Fog, Rain, Snow Filtration / Software – Hardware Components | |
Required Field | 4×40 m | 4×25 m |
Field Slope | Maximum 5 mm | |
Working Temperature | -10 °C … +40 °C | |
Supply Voltage | 220 V AC / 24 V DC | 220 V AC / 24 V DC – 380 V AC |